桥接IC lt7911d linux 驱动

lt7911d C 代码
// SPDX-License-Identifier: GPL-2.0
/*

  • Copyright © 2021 Rockchip Electronics Co. Ltd.
  • lt7911d type-c/DP to MIPI CSI-2 bridge driver.
  • V0.0X01.0X00 first version.
  • V0.0X01.0X01 add 4K30 support.
  • V0.0X01.0X02 add poll resolution change.

*/

#define LT7911D_CHIPID 0x0516
#define CHIPID_REGH 0xA001
#define CHIPID_REGL 0xA000
#define I2C_EN_REG 0x80EE
#define I2C_ENABLE 0x1
#define I2C_DISABLE 0x0

#define AD_HALF_PIX_CLK 0x21
#define SOURCE_DP_RX 0x10
#define RECEIVED_INT 1

#define HTOTAL_H 0xd289
#define HTOTAL_L 0xd28a
#define HACT_H 0xd28b
#define HACT_L 0xd28c
#define HFP_H 0xd29c
#define HFP_L 0xd29d
#define HS_H 0xd294
#define HS_L 0xd295
#define HBP_H 0xd298
#define HBP_L 0xd299

#define VTOTAL_H 0xd29e
#define VTOTAL_L 0xd29f
#define VACT_H 0xd296
#define VACT_L 0xd297
#define VBP 0xd287
#define VFP 0xd288
#define VS 0xd286

#define FM_CLK_SEL 0xa034
#define FREQ_METER_H 0xb8b1
#define FREQ_METER_M 0xb8b2
#define FREQ_METER_L 0xb8b3
#define RG_MK_PRESET_SEL 0xd283

#define STREAM_CTL 0x900a
#define ENABLE_STREAM 0xbf
#define DISABLE_STREAM 0xbe

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/hdmi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_graph.h>
#include <linux/rk-camera-module.h>
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/v4l2-dv-timings.h>
#include <linux/version.h>
#include <linux/videodev2.h>
#include <linux/workqueue.h>
#include <linux/compat.h>
#include <media/v4l2-controls_rockchip.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-dv-timings.h>
#include <media/v4l2-event.h>
#include <media/v4l2-fwnode.h>
#include “lt7911d.h”

#define DRIVER_VERSION KERNEL_VERSION(0, 0x01, 0x02)

static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, “debug level (0-3)”);

#define I2C_MAX_XFER_SIZE 128
#define POLL_INTERVAL_MS 1000

#define LT7911D_LINK_FREQ 400000000
#define LT7911D_PIXEL_RATE 400000000

#define LT7911D_NAME “LT7911D”

static const s64 link_freq_menu_items[] = {
LT7911D_LINK_FREQ,
};

struct lt7911d_state {
struct v4l2_fwnode_bus_mipi_csi2 bus;
struct v4l2_subdev sd;
struct media_pad pad;
struct v4l2_ctrl_handler hdl;
struct i2c_client *i2c_client;
struct mutex confctl_mutex;
struct v4l2_ctrl *detect_tx_5v_ctrl;
struct v4l2_ctrl *audio_sampling_rate_ctrl;
struct v4l2_ctrl *audio_present_ctrl;
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate;
struct delayed_work delayed_work_enable_hotplug;
struct delayed_work delayed_work_res_change;
struct v4l2_dv_timings timings;
struct clk *xvclk;
struct gpio_desc *reset_gpio;
struct gpio_desc *plugin_det_gpio;
struct gpio_desc *power_gpio;
struct work_struct work_i2c_poll;
struct timer_list timer;
const char *module_facing;
const char *module_name;
const char *len_name;
const struct lt7911d_mode *cur_mode;
bool nosignal;
bool enable_hdcp;
bool is_audio_present;
int plugin_irq;
u32 mbus_fmt_code;
u8 csi_lanes_in_use;
u32 module_index;
u32 audio_sampling_rate;
};

static const struct v4l2_dv_timings_cap lt7911d_timings_cap = {
.type = V4L2_DV_BT_656_1120,
.reserved = { 0 },
V4L2_INIT_BT_TIMINGS(1, 10000, 1, 10000, 0, 400000000,
V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_INTERLACED |
V4L2_DV_BT_CAP_REDUCED_BLANKING |
V4L2_DV_BT_CAP_CUSTOM)
};

struct lt7911d_mode {
u32 width;
u32 height;
struct v4l2_fract max_fps;
u32 hts_def;
u32 vts_def;
u32 exp_def;
};

static const struct lt7911d_mode supported_modes[] = {
{
.width = 3840,
.height = 2160,
.max_fps = {
.numerator = 10000,
.denominator = 300000,
},
.hts_def = 4400,
.vts_def = 2250,
}, {
.width = 1920,
.height = 1080,
.max_fps = {
.numerator = 10000,
.denominator = 600000,
},
.hts_def = 2200,
.vts_def = 1125,
}, {
.width = 1280,
.height = 720,
.max_fps = {
.numerator = 10000,
.denominator = 600000,
},
.hts_def = 1650,
.vts_def = 750,
}, {
.width = 720,
.height = 576,
.max_fps = {
.numerator = 10000,
.denominator = 500000,
},
.hts_def = 864,
.vts_def = 625,
}, {
.width = 720,
.height = 480,
.max_fps = {
.numerator = 10000,
.denominator = 600000,
},
.hts_def = 858,
.vts_def = 525,
},
};

static void lt7911d_format_change(struct v4l2_subdev *sd);
static int lt7911d_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd);
static int lt7911d_s_dv_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings);

static inline struct lt7911d_state *to_state(struct v4l2_subdev *sd)
{
return container_of(sd, struct lt7911d_state, sd);
}

static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
{
struct lt7911d_state *lt7911d = to_state(sd);
struct i2c_client *client = lt7911d->i2c_client;
int err;
u8 buf[2] = { 0xFF, reg >> 8};
u8 reg_addr = reg & 0xFF;
struct i2c_msg msgs[3];

msgs[0].addr = client->addr;
msgs[0].flags = 0;
msgs[0].len = 2;
msgs[0].buf = buf;msgs[1].addr = client->addr;
msgs[1].flags = 0;
msgs[1].len = 1;
msgs[1].buf = &reg_addr;msgs[2].addr = client->addr;
msgs[2].flags = I2C_M_RD;
msgs[2].len = n;
msgs[2].buf = values;err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (err != ARRAY_SIZE(msgs)) {v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n",__func__, reg, client->addr);
}if (!debug)return;switch (n) {
case 1:v4l2_info(sd, "I2C read 0x%04x = 0x%02x\n",reg, values[0]);break;
case 2:v4l2_info(sd, "I2C read 0x%04x = 0x%02x%02x\n",reg, values[1], values[0]);break;
case 4:v4l2_info(sd, "I2C read 0x%04x = 0x%02x%02x%02x%02x\n",reg, values[3], values[2], values[1], values[0]);break;
default:v4l2_info(sd, "I2C read %d bytes from address 0x%04x\n",n, reg);
}

}

static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
{
struct lt7911d_state *lt7911d = to_state(sd);
struct i2c_client *client = lt7911d->i2c_client;
int err, i;
struct i2c_msg msgs[2];
u8 data[I2C_MAX_XFER_SIZE];
u8 buf[2] = { 0xFF, reg >> 8};

if ((1 + n) > I2C_MAX_XFER_SIZE) {n = I2C_MAX_XFER_SIZE - 1;v4l2_warn(sd, "i2c wr reg=%04x: len=%d is too big!\n",reg, 1 + n);
}msgs[0].addr = client->addr;
msgs[0].flags = 0;
msgs[0].len = 2;
msgs[0].buf = buf;msgs[1].addr = client->addr;
msgs[1].flags = 0;
msgs[1].len = 1 + n;
msgs[1].buf = data;data[0] = reg & 0xff;
for (i = 0; i < n; i++)data[1 + i] = values[i];err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (err < 0) {v4l2_err(sd, "%s: writing register 0x%x from 0x%x failed\n",__func__, reg, client->addr);return;
}if (!debug)return;switch (n) {
case 1:v4l2_info(sd, "I2C write 0x%04x = 0x%02x\n",reg, data[1]);break;
case 2:v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x\n",reg, data[2], data[1]);break;
case 4:v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x%02x%02x\n",reg, data[4], data[3], data[2], data[1]);break;
default:v4l2_info(sd, "I2C write %d bytes from address 0x%04x\n",n, reg);
}

}

static u8 i2c_rd8(struct v4l2_subdev *sd, u16 reg)
{
u32 val;

i2c_rd(sd, reg, (u8 __force *)&val, 1);
return val;

}

static void i2c_wr8(struct v4l2_subdev *sd, u16 reg, u8 val)
{
i2c_wr(sd, reg, &val, 1);
}

static void lt7911d_i2c_enable(struct v4l2_subdev *sd)
{
i2c_wr8(sd, I2C_EN_REG, I2C_ENABLE);
}

static void lt7911d_i2c_disable(struct v4l2_subdev *sd)
{
i2c_wr8(sd, I2C_EN_REG, I2C_DISABLE);
}

static inline bool tx_5v_power_present(struct v4l2_subdev *sd)
{
bool ret;
int val, i, cnt;
struct lt7911d_state *lt7911d = to_state(sd);

/* if not use plugin det gpio */
if (!lt7911d->plugin_det_gpio)return true;cnt = 0;
for (i = 0; i < 5; i++) {val = gpiod_get_value(lt7911d->plugin_det_gpio);if (val > 0)cnt++;usleep_range(500, 600);
}ret = (cnt >= 3) ? true : false;
v4l2_dbg(1, debug, sd, "%s: %d\n", __func__, ret);return ret;

}

static inline bool no_signal(struct v4l2_subdev *sd)
{
struct lt7911d_state *lt7911d = to_state(sd);

v4l2_dbg(1, debug, sd, "%s no signal:%d\n", __func__,lt7911d->nosignal);return lt7911d->nosignal;

}

static inline bool audio_present(struct v4l2_subdev *sd)
{
struct lt7911d_state *lt7911d = to_state(sd);

return lt7911d->is_audio_present;

}

static int get_audio_sampling_rate(struct v4l2_subdev *sd)
{
static const int code_to_rate[] = {
44100, 0, 48000, 32000, 22050, 384000, 24000, 352800,
88200, 768000, 96000, 705600, 176400, 0, 192000, 0
};

if (no_signal(sd))return 0;return code_to_rate[2];

}

static inline unsigned int fps_calc(const struct v4l2_bt_timings *t)
{
if (!V4L2_DV_BT_FRAME_HEIGHT(t) || !V4L2_DV_BT_FRAME_WIDTH(t))
return 0;

return DIV_ROUND_CLOSEST((unsigned int)t->pixelclock,V4L2_DV_BT_FRAME_HEIGHT(t) * V4L2_DV_BT_FRAME_WIDTH(t));

}

static bool lt7911d_rcv_supported_res(struct v4l2_subdev *sd, u32 width,
u32 height)
{
u32 i;

for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {if ((supported_modes[i].width == width) &&(supported_modes[i].height == height)) {break;}
}if (i == ARRAY_SIZE(supported_modes)) {v4l2_err(sd, "%s do not support res wxh: %dx%d\n", __func__,width, height);return false;
} else {return true;
}

}

static int lt7911d_get_detected_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings)
{
struct lt7911d_state *lt7911d = to_state(sd);
struct v4l2_bt_timings *bt = &timings->bt;
u32 hact, vact, htotal, vtotal;
u32 hbp, hs, hfp, vbp, vs, vfp;
u32 pixel_clock, fps, halt_pix_clk;
u8 clk_h, clk_m, clk_l;
u8 value, val_h, val_l;

memset(timings, 0, sizeof(struct v4l2_dv_timings));lt7911d_i2c_enable(sd);
i2c_wr8(sd, FM_CLK_SEL, AD_HALF_PIX_CLK);
mdelay(10);
clk_h = i2c_rd8(sd, FREQ_METER_H);
clk_m = i2c_rd8(sd, FREQ_METER_M);
clk_l = i2c_rd8(sd, FREQ_METER_L);
halt_pix_clk = (((clk_h & 0xf) << 16) | (clk_m << 8) | clk_l);
pixel_clock = halt_pix_clk * 2 * 1000;i2c_wr8(sd, RG_MK_PRESET_SEL, SOURCE_DP_RX);
mdelay(10);
val_h = i2c_rd8(sd, HTOTAL_H);
val_l = i2c_rd8(sd, HTOTAL_L);
htotal = ((val_h << 8) | val_l) * 2;
val_h = i2c_rd8(sd, VTOTAL_H);
val_l = i2c_rd8(sd, VTOTAL_L);
vtotal = (val_h << 8) | val_l;
val_h = i2c_rd8(sd, HACT_H);
val_l = i2c_rd8(sd, HACT_L);
hact = ((val_h << 8) | val_l) * 2;
val_h = i2c_rd8(sd, VACT_H);
val_l = i2c_rd8(sd, VACT_L);
vact = (val_h << 8) | val_l;
val_h = i2c_rd8(sd, HS_H);
val_l = i2c_rd8(sd, HS_L);
hs = ((val_h << 8) | val_l) * 2;
value = i2c_rd8(sd, VS);
vs = value;
val_h = i2c_rd8(sd, HFP_H);
val_l = i2c_rd8(sd, HFP_L);
hfp = ((val_h << 8) | val_l) * 2;
value = i2c_rd8(sd, VFP);
vfp = value;
val_h = i2c_rd8(sd, HBP_H);
val_l = i2c_rd8(sd, HBP_L);
hbp = ((val_h << 8) | val_l) * 2;
value = i2c_rd8(sd, VBP);
vbp = value;lt7911d_i2c_disable(sd);if (!lt7911d_rcv_supported_res(sd, hact, vact)) {lt7911d->nosignal = true;v4l2_err(sd, "%s: rcv err res, return no signal!\n", __func__);return -EINVAL;
}lt7911d->nosignal = false;
lt7911d->is_audio_present = true;
timings->type = V4L2_DV_BT_656_1120;
bt->interlaced = V4L2_DV_PROGRESSIVE;
bt->width = hact;
bt->height = vact;
bt->vsync = vs;
bt->hsync = hs;
bt->pixelclock = pixel_clock;
bt->hfrontporch = hfp;
bt->vfrontporch = vfp;
bt->hbackporch = hbp;
bt->vbackporch = vbp;
fps = fps_calc(bt);v4l2_info(sd, "act:%dx%d, total:%dx%d, pixclk:%d, fps:%d\n",hact, vact, htotal, vtotal, pixel_clock, fps);
v4l2_info(sd, "hfp:%d, hs:%d, hbp:%d, vfp:%d, vs:%d, vbp:%d\n",bt->hfrontporch, bt->hsync, bt->hbackporch,bt->vfrontporch, bt->vsync, bt->vbackporch);
v4l2_info(sd, "inerlaced:%d,\n", bt->interlaced);return 0;

}

static void lt7911d_delayed_work_enable_hotplug(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct lt7911d_state *lt7911d = container_of(dwork,
struct lt7911d_state, delayed_work_enable_hotplug);
struct v4l2_subdev *sd = &lt7911d->sd;

v4l2_ctrl_s_ctrl(lt7911d->detect_tx_5v_ctrl, tx_5v_power_present(sd));

}

static void lt7911d_delayed_work_res_change(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct lt7911d_state *lt7911d = container_of(dwork,
struct lt7911d_state, delayed_work_res_change);
struct v4l2_subdev *sd = &lt7911d->sd;

lt7911d_format_change(sd);

}

static int lt7911d_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd)
{
struct lt7911d_state *lt7911d = to_state(sd);

return v4l2_ctrl_s_ctrl(lt7911d->detect_tx_5v_ctrl,tx_5v_power_present(sd));

}

static int lt7911d_s_ctrl_audio_sampling_rate(struct v4l2_subdev *sd)
{
struct lt7911d_state *lt7911d = to_state(sd);

return v4l2_ctrl_s_ctrl(lt7911d->audio_sampling_rate_ctrl,get_audio_sampling_rate(sd));

}

static int lt7911d_s_ctrl_audio_present(struct v4l2_subdev *sd)
{
struct lt7911d_state *lt7911d = to_state(sd);

return v4l2_ctrl_s_ctrl(lt7911d->audio_present_ctrl,audio_present(sd));

}

static int lt7911d_update_controls(struct v4l2_subdev *sd)
{
int ret = 0;

ret |= lt7911d_s_ctrl_detect_tx_5v(sd);
ret |= lt7911d_s_ctrl_audio_sampling_rate(sd);
ret |= lt7911d_s_ctrl_audio_present(sd);return ret;

}

static inline void enable_stream(struct v4l2_subdev *sd, bool enable)
{
v4l2_dbg(2, debug, sd, “%s: %sable\n”,
func, enable ? “en” : “dis”);
}

static void lt7911d_format_change(struct v4l2_subdev *sd)
{
struct lt7911d_state *lt7911d = to_state(sd);
struct v4l2_dv_timings timings;
const struct v4l2_event lt7911d_ev_fmt = {
.type = V4L2_EVENT_SOURCE_CHANGE,
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
};

if (lt7911d_get_detected_timings(sd, &timings)) {enable_stream(sd, false);v4l2_dbg(1, debug, sd, "%s: No signal\n", __func__);
} else {if (!v4l2_match_dv_timings(&lt7911d->timings, &timings, 0, false)) {enable_stream(sd, false);/* automatically set timing rather than set by user */lt7911d_s_dv_timings(sd, &timings);v4l2_print_dv_timings(sd->name,"Format_change: New format: ",&timings, false);}
}if (sd->devnode)v4l2_subdev_notify_event(sd, &lt7911d_ev_fmt);

}

static int lt7911d_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
{
struct lt7911d_state *lt7911d = to_state(sd);

schedule_delayed_work(&lt7911d->delayed_work_res_change, HZ / 20);
*handled = true;return 0;

}

static irqreturn_t lt7911d_res_change_irq_handler(int irq, void *dev_id)
{
struct lt7911d_state *lt7911d = dev_id;
bool handled;

lt7911d_isr(&lt7911d->sd, 0, &handled);return handled ? IRQ_HANDLED : IRQ_NONE;

}

static irqreturn_t plugin_detect_irq_handler(int irq, void *dev_id)
{
struct lt7911d_state *lt7911d = dev_id;

/* control hpd output level after 25ms */
schedule_delayed_work(&lt7911d->delayed_work_enable_hotplug,HZ / 40);return IRQ_HANDLED;

}

static void lt7911d_irq_poll_timer(struct timer_list *t)
{
struct lt7911d_state *lt7911d = from_timer(lt7911d, t, timer);

schedule_work(&lt7911d->work_i2c_poll);
mod_timer(&lt7911d->timer, jiffies + msecs_to_jiffies(POLL_INTERVAL_MS));

}

static void lt7911d_work_i2c_poll(struct work_struct *work)
{
struct lt7911d_state *lt7911d = container_of(work,
struct lt7911d_state, work_i2c_poll);
struct v4l2_subdev *sd = &lt7911d->sd;

lt7911d_format_change(sd);

}

static int lt7911d_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
struct v4l2_event_subscription *sub)
{
switch (sub->type) {
case V4L2_EVENT_SOURCE_CHANGE:
return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
case V4L2_EVENT_CTRL:
return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
default:
return -EINVAL;
}
}

static int lt7911d_g_input_status(struct v4l2_subdev *sd, u32 *status)
{
*status = 0;
*status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0;

v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status);return 0;

}

static int lt7911d_s_dv_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings)
{
struct lt7911d_state *lt7911d = to_state(sd);

if (!timings)return -EINVAL;if (debug)v4l2_print_dv_timings(sd->name, "s_dv_timings: ",timings, false);if (v4l2_match_dv_timings(&lt7911d->timings, timings, 0, false)) {v4l2_dbg(1, debug, sd, "%s: no change\n", __func__);return 0;
}if (!v4l2_valid_dv_timings(timings,&lt7911d_timings_cap, NULL, NULL)) {v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__);return -ERANGE;
}lt7911d->timings = *timings;enable_stream(sd, false);return 0;

}

static int lt7911d_g_dv_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings)
{
struct lt7911d_state *lt7911d = to_state(sd);

*timings = lt7911d->timings;return 0;

}

static int lt7911d_enum_dv_timings(struct v4l2_subdev *sd,
struct v4l2_enum_dv_timings *timings)
{
if (timings->pad != 0)
return -EINVAL;

return v4l2_enum_dv_timings_cap(timings,&lt7911d_timings_cap, NULL, NULL);

}

static int lt7911d_query_dv_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings)
{
struct lt7911d_state *lt7911d = to_state(sd);

*timings = lt7911d->timings;
if (debug)v4l2_print_dv_timings(sd->name,"query_dv_timings: ", timings, false);if (!v4l2_valid_dv_timings(timings, &lt7911d_timings_cap, NULL,NULL)) {v4l2_dbg(1, debug, sd, "%s: timings out of range\n",__func__);return -ERANGE;
}return 0;

}

static int lt7911d_dv_timings_cap(struct v4l2_subdev *sd,
struct v4l2_dv_timings_cap *cap)
{
if (cap->pad != 0)
return -EINVAL;

*cap = lt7911d_timings_cap;return 0;

}

static int lt7911d_g_mbus_config(struct v4l2_subdev *sd,
unsigned int pad, struct v4l2_mbus_config *cfg)
{
struct lt7911d_state *lt7911d = to_state(sd);

cfg->type = V4L2_MBUS_CSI2_DPHY;
cfg->flags = V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK |V4L2_MBUS_CSI2_CHANNEL_0;switch (lt7911d->csi_lanes_in_use) {
case 1:cfg->flags |= V4L2_MBUS_CSI2_1_LANE;break;
case 2:cfg->flags |= V4L2_MBUS_CSI2_2_LANE;break;
case 3:cfg->flags |= V4L2_MBUS_CSI2_3_LANE;break;
case 4:cfg->flags |= V4L2_MBUS_CSI2_4_LANE;break;default:return -EINVAL;
}return 0;

}

static int lt7911d_s_stream(struct v4l2_subdev *sd, int enable)
{
enable_stream(sd, enable);

return 0;

}

static int lt7911d_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
switch (code->index) {
case 0:
code->code = MEDIA_BUS_FMT_UYVY8_2X8;
break;

default:return -EINVAL;
}return 0;

}

static int lt7911d_enum_frame_sizes(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
if (fse->index >= ARRAY_SIZE(supported_modes))
return -EINVAL;

if (fse->code != MEDIA_BUS_FMT_UYVY8_2X8)return -EINVAL;fse->min_width  = supported_modes[fse->index].width;
fse->max_width  = supported_modes[fse->index].width;
fse->max_height = supported_modes[fse->index].height;
fse->min_height = supported_modes[fse->index].height;return 0;

}

static int lt7911d_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct lt7911d_state *lt7911d = to_state(sd);

mutex_lock(&lt7911d->confctl_mutex);
format->format.code = lt7911d->mbus_fmt_code;
format->format.width = lt7911d->timings.bt.width;
format->format.height = lt7911d->timings.bt.height;
format->format.field =lt7911d->timings.bt.interlaced ?V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE;
format->format.colorspace = V4L2_COLORSPACE_SRGB;
mutex_unlock(&lt7911d->confctl_mutex);v4l2_dbg(1, debug, sd, "%s: fmt code:%d, w:%d, h:%d, field code:%d\n",__func__, format->format.code, format->format.width,format->format.height, format->format.field);return 0;

}

static int lt7911d_enum_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_interval_enum *fie)
{
if (fie->index >= ARRAY_SIZE(supported_modes))
return -EINVAL;

if (fie->code != MEDIA_BUS_FMT_UYVY8_2X8)return -EINVAL;fie->width = supported_modes[fie->index].width;
fie->height = supported_modes[fie->index].height;
fie->interval = supported_modes[fie->index].max_fps;return 0;

}

static int lt7911d_get_reso_dist(const struct lt7911d_mode *mode,
struct v4l2_mbus_framefmt *framefmt)
{
return abs(mode->width - framefmt->width) +
abs(mode->height - framefmt->height);
}

static const struct lt7911d_mode *
lt7911d_find_best_fit(struct v4l2_subdev_format *fmt)
{
struct v4l2_mbus_framefmt *framefmt = &fmt->format;
int dist;
int cur_best_fit = 0;
int cur_best_fit_dist = -1;
unsigned int i;

for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {dist = lt7911d_get_reso_dist(&supported_modes[i], framefmt);if (cur_best_fit_dist == -1 || dist < cur_best_fit_dist) {cur_best_fit_dist = dist;cur_best_fit = i;}
}return &supported_modes[cur_best_fit];

}

static int lt7911d_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct lt7911d_state *lt7911d = to_state(sd);
const struct lt7911d_mode *mode;

/* is overwritten by get_fmt */
u32 code = format->format.code;
int ret = lt7911d_get_fmt(sd, cfg, format);format->format.code = code;if (ret)return ret;switch (code) {
case MEDIA_BUS_FMT_UYVY8_2X8:break;default:return -EINVAL;
}if (format->which == V4L2_SUBDEV_FORMAT_TRY)return 0;lt7911d->mbus_fmt_code = format->format.code;
mode = lt7911d_find_best_fit(format);
lt7911d->cur_mode = mode;
enable_stream(sd, false);return 0;

}

static int lt7911d_g_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_frame_interval *fi)
{
struct lt7911d_state *lt7911d = to_state(sd);
const struct lt7911d_mode *mode = lt7911d->cur_mode;

mutex_lock(&lt7911d->confctl_mutex);
fi->interval = mode->max_fps;
mutex_unlock(&lt7911d->confctl_mutex);return 0;

}

static void lt7911d_get_module_inf(struct lt7911d_state *lt7911d,
struct rkmodule_inf *inf)
{
memset(inf, 0, sizeof(*inf));
strscpy(inf->base.sensor, LT7911D_NAME, sizeof(inf->base.sensor));
strscpy(inf->base.module, lt7911d->module_name, sizeof(inf->base.module));
strscpy(inf->base.lens, lt7911d->len_name, sizeof(inf->base.lens));
}

static long lt7911d_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
{
struct lt7911d_state *lt7911d = to_state(sd);
long ret = 0;

switch (cmd) {
case RKMODULE_GET_MODULE_INFO:lt7911d_get_module_inf(lt7911d, (struct rkmodule_inf *)arg);break;
case RKMODULE_GET_HDMI_MODE:*(int *)arg = RKMODULE_HDMIIN_MODE;break;
default:ret = -ENOIOCTLCMD;break;
}return ret;

}

#ifdef CONFIG_COMPAT
static long lt7911d_compat_ioctl32(struct v4l2_subdev *sd,
unsigned int cmd, unsigned long arg)
{
void __user *up = compat_ptr(arg);
struct rkmodule_inf *inf;
long ret;
int *seq;

switch (cmd) {
case RKMODULE_GET_MODULE_INFO:inf = kzalloc(sizeof(*inf), GFP_KERNEL);if (!inf) {ret = -ENOMEM;return ret;}ret = lt7911d_ioctl(sd, cmd, inf);if (!ret) {ret = copy_to_user(up, inf, sizeof(*inf));if (ret)ret = -EFAULT;}kfree(inf);break;
case RKMODULE_GET_HDMI_MODE:seq = kzalloc(sizeof(*seq), GFP_KERNEL);if (!seq) {ret = -ENOMEM;return ret;}ret = lt7911d_ioctl(sd, cmd, seq);if (!ret) {ret = copy_to_user(up, seq, sizeof(*seq));if (ret)ret = -EFAULT;}kfree(seq);break;
default:ret = -ENOIOCTLCMD;break;
}return ret;

}
#endif

static const struct v4l2_subdev_core_ops lt7911d_core_ops = {
.interrupt_service_routine = lt7911d_isr,
.subscribe_event = lt7911d_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
.ioctl = lt7911d_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl32 = lt7911d_compat_ioctl32,
#endif
};

static const struct v4l2_subdev_video_ops lt7911d_video_ops = {
.g_input_status = lt7911d_g_input_status,
.s_dv_timings = lt7911d_s_dv_timings,
.g_dv_timings = lt7911d_g_dv_timings,
.query_dv_timings = lt7911d_query_dv_timings,
.s_stream = lt7911d_s_stream,
.g_frame_interval = lt7911d_g_frame_interval,
};

static const struct v4l2_subdev_pad_ops lt7911d_pad_ops = {
.enum_mbus_code = lt7911d_enum_mbus_code,
.enum_frame_size = lt7911d_enum_frame_sizes,
.enum_frame_interval = lt7911d_enum_frame_interval,
.set_fmt = lt7911d_set_fmt,
.get_fmt = lt7911d_get_fmt,
.enum_dv_timings = lt7911d_enum_dv_timings,
.dv_timings_cap = lt7911d_dv_timings_cap,
.get_mbus_config = lt7911d_g_mbus_config,
};

static const struct v4l2_subdev_ops lt7911d_ops = {
.core = &lt7911d_core_ops,
.video = &lt7911d_video_ops,
.pad = &lt7911d_pad_ops,
};

static const struct v4l2_ctrl_config lt7911d_ctrl_audio_sampling_rate = {
.id = RK_V4L2_CID_AUDIO_SAMPLING_RATE,
.name = “Audio sampling rate”,
.type = V4L2_CTRL_TYPE_INTEGER,
.min = 0,
.max = 768000,
.step = 1,
.def = 0,
.flags = V4L2_CTRL_FLAG_READ_ONLY,
};

static const struct v4l2_ctrl_config lt7911d_ctrl_audio_present = {
.id = RK_V4L2_CID_AUDIO_PRESENT,
.name = “Audio present”,
.type = V4L2_CTRL_TYPE_BOOLEAN,
.min = 0,
.max = 1,
.step = 1,
.def = 0,
.flags = V4L2_CTRL_FLAG_READ_ONLY,
};

static void lt7911d_reset(struct lt7911d_state lt7911d)
{
gpiod_set_value(lt7911d->reset_gpio, 0);
usleep_range(2000, 2100);
gpiod_set_value(lt7911d->reset_gpio, 1);
usleep_range(120
1000, 1211000);
gpiod_set_value(lt7911d->reset_gpio, 0);
usleep_range(300
1000, 310*1000);
}

static int lt7911d_init_v4l2_ctrls(struct lt7911d_state *lt7911d)
{
struct v4l2_subdev *sd;
int ret;

sd = &lt7911d->sd;
ret = v4l2_ctrl_handler_init(&lt7911d->hdl, 5);
if (ret)return ret;lt7911d->link_freq = v4l2_ctrl_new_int_menu(&lt7911d->hdl, NULL,V4L2_CID_LINK_FREQ,ARRAY_SIZE(link_freq_menu_items) - 1, 0,link_freq_menu_items);
lt7911d->pixel_rate = v4l2_ctrl_new_std(&lt7911d->hdl, NULL,V4L2_CID_PIXEL_RATE,0, LT7911D_PIXEL_RATE, 1, LT7911D_PIXEL_RATE);lt7911d->detect_tx_5v_ctrl = v4l2_ctrl_new_std(&lt7911d->hdl,NULL, V4L2_CID_DV_RX_POWER_PRESENT,0, 1, 0, 0);lt7911d->audio_sampling_rate_ctrl =v4l2_ctrl_new_custom(&lt7911d->hdl,&lt7911d_ctrl_audio_sampling_rate, NULL);
lt7911d->audio_present_ctrl = v4l2_ctrl_new_custom(&lt7911d->hdl,&lt7911d_ctrl_audio_present, NULL);sd->ctrl_handler = &lt7911d->hdl;
if (lt7911d->hdl.error) {ret = lt7911d->hdl.error;v4l2_err(sd, "cfg v4l2 ctrls failed! ret:%d\n", ret);return ret;
}__v4l2_ctrl_s_ctrl(lt7911d->link_freq, link_freq_menu_items[0]);
__v4l2_ctrl_s_ctrl_int64(lt7911d->pixel_rate, LT7911D_PIXEL_RATE);if (lt7911d_update_controls(sd)) {ret = -ENODEV;v4l2_err(sd, "update v4l2 ctrls failed! ret:%d\n", ret);return ret;
}return 0;

}

#ifdef CONFIG_OF
static int lt7911d_probe_of(struct lt7911d_state *lt7911d)
{
struct device *dev = &lt7911d->i2c_client->dev;
struct device_node *node = dev->of_node;
struct v4l2_fwnode_endpoint endpoint = { .bus_type = 0 };
struct device_node *ep;
int ret;

ret = of_property_read_u32(node, RKMODULE_CAMERA_MODULE_INDEX,&lt7911d->module_index);
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_FACING,&lt7911d->module_facing);
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_NAME,&lt7911d->module_name);
ret |= of_property_read_string(node, RKMODULE_CAMERA_LENS_NAME,&lt7911d->len_name);
if (ret) {dev_err(dev, "could not get module information!\n");return -EINVAL;
}lt7911d->power_gpio = devm_gpiod_get_optional(dev, "power",GPIOD_OUT_LOW);
if (IS_ERR(lt7911d->power_gpio)) {dev_err(dev, "failed to get power gpio\n");ret = PTR_ERR(lt7911d->power_gpio);return ret;
}lt7911d->reset_gpio = devm_gpiod_get_optional(dev, "reset",GPIOD_OUT_HIGH);
if (IS_ERR(lt7911d->reset_gpio)) {dev_err(dev, "failed to get reset gpio\n");ret = PTR_ERR(lt7911d->reset_gpio);return ret;
}lt7911d->plugin_det_gpio = devm_gpiod_get_optional(dev, "plugin-det",GPIOD_IN);
if (IS_ERR(lt7911d->plugin_det_gpio)) {dev_err(dev, "failed to get plugin det gpio\n");ret = PTR_ERR(lt7911d->plugin_det_gpio);return ret;
}ep = of_graph_get_next_endpoint(dev->of_node, NULL);
if (!ep) {dev_err(dev, "missing endpoint node\n");return -EINVAL;
}ret = v4l2_fwnode_endpoint_alloc_parse(of_fwnode_handle(ep), &endpoint);
if (ret) {dev_err(dev, "failed to parse endpoint\n");goto put_node;
}if (endpoint.bus_type != V4L2_MBUS_CSI2_DPHY ||endpoint.bus.mipi_csi2.num_data_lanes == 0) {dev_err(dev, "missing CSI-2 properties in endpoint\n");ret = -EINVAL;goto free_endpoint;
}lt7911d->xvclk = devm_clk_get(dev, "xvclk");
if (IS_ERR(lt7911d->xvclk)) {dev_err(dev, "failed to get xvclk\n");ret = -EINVAL;goto free_endpoint;
}ret = clk_prepare_enable(lt7911d->xvclk);
if (ret) {dev_err(dev, "Failed! to enable xvclk\n");goto free_endpoint;
}lt7911d->csi_lanes_in_use = endpoint.bus.mipi_csi2.num_data_lanes;
lt7911d->bus = endpoint.bus.mipi_csi2;
lt7911d->enable_hdcp = false;gpiod_set_value(lt7911d->power_gpio, 1);
lt7911d_reset(lt7911d);ret = 0;

free_endpoint:
v4l2_fwnode_endpoint_free(&endpoint);
put_node:
of_node_put(ep);
return ret;
}
#else
static inline int lt7911d_probe_of(struct lt7911d_state *state)
{
return -ENODEV;
}
#endif
static int lt7911d_check_chip_id(struct lt7911d_state *lt7911d)
{
struct device *dev = &lt7911d->i2c_client->dev;
struct v4l2_subdev *sd = &lt7911d->sd;
u8 id_h, id_l;
u32 chipid;
int ret = 0;

lt7911d_i2c_enable(sd);
id_l  = i2c_rd8(sd, CHIPID_REGL);
id_h  = i2c_rd8(sd, CHIPID_REGH);
lt7911d_i2c_disable(sd);chipid = (id_h << 8) | id_l;
if (chipid != LT7911D_CHIPID) {dev_err(dev, "chipid err, read:%#x, expect:%#x\n",chipid, LT7911D_CHIPID);return -EINVAL;
}
dev_info(dev, "check chipid ok, id:%#x", chipid);return ret;

}

static int lt7911d_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lt7911d_state *lt7911d;
struct v4l2_subdev *sd;
struct device *dev = &client->dev;
char facing[2];
int err;

dev_info(dev, "driver version: %02x.%02x.%02x",DRIVER_VERSION >> 16,(DRIVER_VERSION & 0xff00) >> 8,DRIVER_VERSION & 0x00ff);lt7911d = devm_kzalloc(dev, sizeof(struct lt7911d_state), GFP_KERNEL);
if (!lt7911d)return -ENOMEM;sd = &lt7911d->sd;
lt7911d->i2c_client = client;
lt7911d->cur_mode = &supported_modes[0];
lt7911d->mbus_fmt_code = MEDIA_BUS_FMT_UYVY8_2X8;err = lt7911d_probe_of(lt7911d);
if (err) {v4l2_err(sd, "lt7911d_parse_of failed! err:%d\n", err);return err;
}err = lt7911d_check_chip_id(lt7911d);
if (err < 0)return err;lt7911d_reset(lt7911d);mutex_init(&lt7911d->confctl_mutex);
err = lt7911d_init_v4l2_ctrls(lt7911d);
if (err)goto err_free_hdl;client->flags |= I2C_CLIENT_SCCB;

#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
v4l2_i2c_subdev_init(sd, client, &lt7911d_ops);
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
#endif

#if defined(CONFIG_MEDIA_CONTROLLER)
lt7911d->pad.flags = MEDIA_PAD_FL_SOURCE;
sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
err = media_entity_pads_init(&sd->entity, 1, &lt7911d->pad);
if (err < 0) {
v4l2_err(sd, “media entity init failed! err:%d\n”, err);
goto err_free_hdl;
}
#endif
memset(facing, 0, sizeof(facing));
if (strcmp(lt7911d->module_facing, “back”) == 0)
facing[0] = ‘b’;
else
facing[0] = ‘f’;

snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",lt7911d->module_index, facing,LT7911D_NAME, dev_name(sd->dev));
err = v4l2_async_register_subdev_sensor_common(sd);
if (err < 0) {v4l2_err(sd, "v4l2 register subdev failed! err:%d\n", err);goto err_clean_entity;
}INIT_DELAYED_WORK(&lt7911d->delayed_work_enable_hotplug,lt7911d_delayed_work_enable_hotplug);
INIT_DELAYED_WORK(&lt7911d->delayed_work_res_change,lt7911d_delayed_work_res_change);if (lt7911d->i2c_client->irq) {v4l2_dbg(1, debug, sd, "cfg lt7911d irq!\n");err = devm_request_threaded_irq(dev,lt7911d->i2c_client->irq,NULL, lt7911d_res_change_irq_handler,IRQF_TRIGGER_RISING | IRQF_ONESHOT,"lt7911d", lt7911d);if (err) {v4l2_err(sd, "request irq failed! err:%d\n", err);goto err_work_queues;}
} else {v4l2_dbg(1, debug, sd, "no irq, cfg poll!\n");INIT_WORK(&lt7911d->work_i2c_poll, lt7911d_work_i2c_poll);timer_setup(&lt7911d->timer, lt7911d_irq_poll_timer, 0);lt7911d->timer.expires = jiffies +msecs_to_jiffies(POLL_INTERVAL_MS);add_timer(&lt7911d->timer);
}lt7911d->plugin_irq = gpiod_to_irq(lt7911d->plugin_det_gpio);
if (lt7911d->plugin_irq < 0)dev_err(dev, "failed to get plugin det irq, maybe no use\n");err = devm_request_threaded_irq(dev, lt7911d->plugin_irq, NULL,plugin_detect_irq_handler, IRQF_TRIGGER_FALLING |IRQF_TRIGGER_RISING | IRQF_ONESHOT, "lt7911d",lt7911d);
if (err)dev_err(dev, "failed to register plugin det irq (%d), maybe no use\n", err);err = v4l2_ctrl_handler_setup(sd->ctrl_handler);
if (err) {v4l2_err(sd, "v4l2 ctrl handler setup failed! err:%d\n", err);goto err_work_queues;
}v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,client->addr << 1, client->adapter->name);return 0;

err_work_queues:
if (!lt7911d->i2c_client->irq)
flush_work(&lt7911d->work_i2c_poll);
cancel_delayed_work(&lt7911d->delayed_work_enable_hotplug);
cancel_delayed_work(&lt7911d->delayed_work_res_change);
err_clean_entity:
#if defined(CONFIG_MEDIA_CONTROLLER)
media_entity_cleanup(&sd->entity);
#endif
err_free_hdl:
v4l2_ctrl_handler_free(&lt7911d->hdl);
mutex_destroy(&lt7911d->confctl_mutex);
return err;
}

static int lt7911d_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct lt7911d_state *lt7911d = to_state(sd);

if (!lt7911d->i2c_client->irq) {del_timer_sync(&lt7911d->timer);flush_work(&lt7911d->work_i2c_poll);
}
cancel_delayed_work_sync(&lt7911d->delayed_work_enable_hotplug);
cancel_delayed_work_sync(&lt7911d->delayed_work_res_change);
v4l2_async_unregister_subdev(sd);
v4l2_device_unregister_subdev(sd);

#if defined(CONFIG_MEDIA_CONTROLLER)
media_entity_cleanup(&sd->entity);
#endif
v4l2_ctrl_handler_free(&lt7911d->hdl);
mutex_destroy(&lt7911d->confctl_mutex);
clk_disable_unprepare(lt7911d->xvclk);

return 0;

}

#if IS_ENABLED(CONFIG_OF)
static const struct of_device_id lt7911d_of_match[] = {
{ .compatible = “lontium,lt7911d” },
{},
};
MODULE_DEVICE_TABLE(of, lt7911d_of_match);
#endif

static struct i2c_driver lt7911d_driver = {
.driver = {
.name = LT7911D_NAME,
.of_match_table = of_match_ptr(lt7911d_of_match),
},
.probe = lt7911d_probe,
.remove = lt7911d_remove,
};

static int __init lt7911d_driver_init(void)
{
return i2c_add_driver(&lt7911d_driver);
}

static void __exit lt7911d_driver_exit(void)
{
i2c_del_driver(&lt7911d_driver);
}

device_initcall_sync(lt7911d_driver_init);
module_exit(lt7911d_driver_exit);

MODULE_DESCRIPTION(“Lontium lt7911d HDMI to CSI-2 bridge driver”);
MODULE_AUTHOR(“xxx”);
MODULE_LICENSE(“GPL v2”);

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.xdnf.cn/news/9313.html

如若内容造成侵权/违法违规/事实不符,请联系一条长河网进行投诉反馈,一经查实,立即删除!

相关文章

如何关闭 Ubuntu22.04 LTS 的更新提醒

引言 众所周知&#xff0c;Ubuntu 的软件更新和版本更新提醒是又多又烦&#xff0c;如果不小心更新到了最新的 Ubuntu 还可能面临各种各样的问题&#xff0c;这里提供一个解决方法 步骤 首先按照下面步骤打开 Software & Updates 然后按照下面步骤依次点击 最后关闭即可…

CS61b part5

8.1 The Desire for Generality 今天我们将会讨论一个全新的主题&#xff0c;称为继承。为了铺垫&#xff0c;让我们考虑在过去几节课中构建的SList类和AList类。我们看到它们实际上具有完全相同的操作&#xff0c;它们都允许我们添加元素、获取元素、移除元素以及获取大小&am…

隆盛策略正规股票杠杠交易市场A股,盘中突变…

突然跌了。 查查配分析A股市场今天大幅高开,上证指数一度重返3500点之上,临近午盘,该指数翻绿。TMT赛道掀起涨停潮,成为上午A股市场最大亮点之一。 另外,多只近期强势股继续走强,有股票在短短9个交易日的时间股价自低位涨了约3倍。 隆盛策略以其专业的服务和较低的管理费用在…

学生公寓人走断电控制系统的设计要求

石家庄光大远通电气有限公司学生公寓人走断电系统技术背景用电器待机能耗往往是一种不易被发现的“隐藏的浪费”&#xff0c;如果将一户家庭的空调、洗衣机、电视、微波炉、电饭煲五类电器进行计算&#xff0c;待机功率在12W到15W&#xff0c;待机能耗0.2度到0.33度电。每年能耗…

解决yum命令报错“Could not resolve host: mirrorlist.centos.org

这个主要是yum源出了问题或者服务器网络有问题&#xff0c;检查网络排除网络问题后&#xff0c;可更换源 mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.k wget -O /etc/yum.repos.d/CentOS-Base.repo https://mirrors.huaweicloud.com/repository…

TikTok Spark Ads火花广告是什么?如何设置?

TikTok的广告类型多样、功能各异&#xff0c;如果你需要投放精准度更高、效果更持久、更能吸引用户点击和参与的广告&#xff0c;那么Spark Ads会是一个相当不错的选择。 一、什么是TikTok Spark Ads 1.概念 Spark Ads是直接使用真实的自然流量视频及其功能来进行宣传的一种原…

微软日志丢失事件敲响安全警钟

NEWS | 事件回顾 最近&#xff0c;全球最大的软件公司之一——微软&#xff0c;遭遇了一场罕见的日志丢失危机。据报告&#xff0c;从9月2日至9月19日&#xff0c;持续长达两周的时间里&#xff0c;微软的多项核心云服务&#xff0c;包括身份验证平台Microsoft Entra、安全信息…

「QT」几何数据类 之 QRectF 浮点型矩形类

✨博客主页何曾参静谧的博客&#x1f4cc;文章专栏「QT」QT5程序设计&#x1f4da;全部专栏「VS」Visual Studio「C/C」C/C程序设计「UG/NX」BlockUI集合「Win」Windows程序设计「DSA」数据结构与算法「UG/NX」NX二次开发「QT」QT5程序设计「File」数据文件格式「PK」Parasolid…

Android音频进阶之PCM设备创建(九十三)

简介: CSDN博客专家、《Android系统多媒体进阶实战》一书作者 新书发布:《Android系统多媒体进阶实战》🚀 优质专栏: Audio工程师进阶系列【原创干货持续更新中……】🚀 优质专栏: 多媒体系统工程师系列【原创干货持续更新中……】🚀 优质视频课程:AAOS车载系统+…

【TMM2024】Frequency-Guided Spatial Adaptation for Camouflaged Object Detection

论文链接&#xff1a;https://arxiv.org/abs/2409.12421 这个论文研究 Camouflaged Object Detection &#xff08;COD&#xff09;问题&#xff0c;作者认为&#xff0c;使用 pretrained foundation model 可以改进COD的准确率&#xff0c;但是当前的 adaptor 大多学习空间特…

大数据-208 数据挖掘 机器学习理论 - 岭回归 和 Lasso 算法 原理

点一下关注吧&#xff01;&#xff01;&#xff01;非常感谢&#xff01;&#xff01;持续更新&#xff01;&#xff01;&#xff01; 目前已经更新到了&#xff1a; Hadoop&#xff08;已更完&#xff09;HDFS&#xff08;已更完&#xff09;MapReduce&#xff08;已更完&am…

Spark Streaming

流处理和批处理 spark streaming底层原理 滑动窗口 window窗口操作二 过车数据案例

关于圆周率-3

最后一个问题&#xff0c;欧拉公式&#xff0c; 到底要说明的是什么。从欧拉函数的四个特殊值可以看出&#xff0c; 可见这个函数的作用是将角度映射回它原来的数值。在螺旋楼梯的例子中&#xff0c;我们用虚数单位的倍数搭建楼梯&#xff0c;并构造角度&#xff0c;角度是一系…

npm : 无法加载文件 C:\Program Files\nodejs\npm.ps1,因为在此系统上禁止运行脚本。

npm : 无法加载文件 C:\Program Files\nodejs\npm.ps1&#xff0c;因为在此系统上禁止运行脚本。有关详细信息&#xff0c;请参阅 https:/go.microsoft.com/fwlink/?LinkID135170 中的 about_Exe cution_Policies。 所在位置 行:1 字符: 1 npm install ~~~ CategoryInf…

WPF+MVVM案例实战与特效(二十六)- 3D粒子方块波浪墙效果实现

文章目录 1、案例效果2、案例实现1、文件创建2. 功能代码实现3、粒子功能应用1、前端布局与样式2、代码解释2、 后端功能代码1、案例效果 2、案例实现 1、文件创建 打开 Wpf_Examples 项目、Models 文件夹下创建 3D粒子模型类 ParticleCubeWaveModel.cs 文件。在Tools 文件夹…

NVR设备ONVIF接入平台EasyCVR私有化部署视频平台如何安装欧拉OpenEuler 20.3 MySQL

在当今数字化时代&#xff0c;安防视频监控系统已成为保障公共安全和个人财产安全的重要工具。NVR设备ONVIF接入平台EasyCVR作为一款功能强大的智能视频监控管理平台&#xff0c;它不仅提供了视频远程监控、录像、存储与回放等基础功能&#xff0c;还涵盖了视频转码、视频快照、…

动态规划理论基础和习题【力扣】【算法学习day.26】

前言 ###我做这类文档一个重要的目的还是给正在学习的大家提供方向&#xff08;例如想要掌握基础用法&#xff0c;该刷哪些题&#xff1f;&#xff09;我的解析也不会做的非常详细&#xff0c;只会提供思路和一些关键点&#xff0c;力扣上的大佬们的题解质量是非常非常高滴&am…

webpack 执行流程 — 实现 myWebpack

前言 实现 myWebpack 主要是为了更好的理解&#xff0c;webpack 中的工作流程&#xff0c;一切都是最简单的实现&#xff0c;不包含细节内容和边界处理&#xff0c;涉及到 ast 抽象语法树和编译代码部分&#xff0c;最好可以打印出来观察一下&#xff0c;方便后续的理解。 re…

【WRF模拟】全过程总结:WPS预处理及WRF运行

【WRF模拟】全过程总结:WPS预处理及WRF运行 1 数据准备1.1 嵌套域设置(Customize domain)-基于QGis中gis4wrf插件1.2 静态地理数据1.2.1 叶面积指数LAI和植被覆盖度Fpar(月尺度)1.2.2 地面反照率(月尺度)1.2.3 土地利用类型+不透水面积1.2.4 数据处理:geotiff→tiff(W…