电脑通过串口助手和51单片机串口通讯

今天有时间把电脑和51单片机之间的串口通讯搞定了，电脑发送的串口数据，单片机能够正常接收并显示到oled屏幕上，特此记录一下，防止后面自己忘记了怎么搞得了。

先来两个图片看看结果吧！

下面是串口3.c的文件全部内容：

#include"oled.h"
#define REC_MAX 30  //最大接收数据字节数  修改30就是可以了
#define END_STR '.'  //接收数据的结束标志  修改.能新建结束符了十六进制也可以u8 dat[REC_MAX]={0};    // 接收串口数据的数组，只接收20个字节
u8 i=0;
void time_init()  // 定时器初始化
{SCON=0x50;      // 串口工作在8位异步允许接收模式TMOD=0x20;      // 波特率设置由定时器1产生TH1=0xFD;        // 9600TL1=0xFD;        // 9600ES=1;            // 串口中断允许EA=1;             // 总中断允许TR1=1;            // 定时器1中断允许
}int main()
{OLED_Init();     // oled初始化OLED_Clear();     // oled 清屏time_init();       // 定时器初始化while(1){OLED_ShowString(0,0,dat,16);   // 显示dat数组中的字符}
}void zd() interrupt 4  //串口中断函数
{u8 j=0;if(RI==1)           //如果是允许接收等于1{	dat[i]=SBUF;       // 数组的第i位为接收的1字节数据i++;              // i++ ，走向下一个字节RI=0;            //接收标志位清0，开始接收下一个字节}if(SBUF == END_STR)   //如果SBUF接收缓存中是0x2E也就是“.”，就是结束符，开始下面的代码：{OLED_Clear();      // 清屏for(j=i;j<REC_MAX;j++)  //由于每次接收到了比数组中字节数少的信息后，上次的字节信息还有{             // 所以这里把每次接收完了，把后面的字节都填充成0.dat[j]=0x00;}OLED_Clear();     //  实际使用中1次清屏有可能有残留，字符，所以清两次i=0;}}

下面是oled.h的全部内容：

#include "reg52.h"#ifndef __OLED_H
#define __OLED_H		  	 #define  u8 unsigned char 
#define  u32 unsigned int #define OLED_CMD  0	//写命令
#define OLED_DATA 1	//写数据
#define OLED_MODE 0sbit OLED_SCL=P3^2;					//时钟线
sbit OLED_SDIN=P3^3;				//数据线#define OLED_CS_Clr()  OLED_CS=0
#define OLED_CS_Set()  OLED_CS=1#define OLED_RST_Clr() OLED_RST=0
#define OLED_RST_Set() OLED_RST=1#define OLED_DC_Clr() OLED_DC=0
#define OLED_DC_Set() OLED_DC=1#define OLED_SCLK_Clr() OLED_SCL=0
#define OLED_SCLK_Set() OLED_SCL=1#define OLED_SDIN_Clr() OLED_SDIN=0
#define OLED_SDIN_Set() OLED_SDIN=1//OLED模式设置
//0:4线串行模式
//1:并行8080模式#define SIZE 16
#define XLevelL		0x02
#define XLevelH		0x10
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xFF 
#define X_WIDTH 	128
#define Y_WIDTH 	64	    						  
//-----------------OLED端口定义----------------  					   void delay_ms(unsigned int ms);//OLED控制用函数
void OLED_WR_Byte(unsigned dat,unsigned cmd);  
void OLED_Display_On(void);
void OLED_Display_Off(void);	   							   		    
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(u8 x,u8 y,u8 t);
void OLED_Fill(u8 x1,u8 y1,u8 x2,u8 y2,u8 dot);
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size);
void OLED_ShowString(u8 x,u8 y, u8 *p,u8 Char_Size);	 
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(u8 x,u8 y,u8 no);
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);
void Delay_50ms(unsigned int Del_50ms);
void Delay_1ms(unsigned int Del_1ms);
void fill_picture(unsigned char fill_Data);
void Picture();
void IIC_Start();
void IIC_Stop();
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);
void IIC_Wait_Ack();#endif

下面是oled.c的全部内容：

#include "oled.h"
#include "oledfont.h"  	//取模的中文库 void delay_ms(unsigned int ms)
{                         unsigned int a;while(ms){a=1800;while(a--);ms--;}
}
/**********************************************
//IIC Start
**********************************************/
void IIC_Start()
{OLED_SCLK_Set() ;OLED_SDIN_Set();OLED_SDIN_Clr();OLED_SCLK_Clr();
}/**********************************************
//IIC Stop
**********************************************/
void IIC_Stop()
{
OLED_SCLK_Set() ;
//	OLED_SCLK_Clr();OLED_SDIN_Clr();OLED_SDIN_Set();}void IIC_Wait_Ack()
{//GPIOB->CRH &= 0XFFF0FFFF;	//设置PB12为上拉输入模式//GPIOB->CRH |= 0x00080000;
//	OLED_SDA = 1;
//	delay_us(1);//OLED_SCL = 1;//delay_us(50000);
/*	while(1){if(!OLED_SDA)				//判断是否接收到OLED 应答信号{//GPIOB->CRH &= 0XFFF0FFFF;	//设置PB12为通用推免输出模式//GPIOB->CRH |= 0x00030000;return;}}
*/OLED_SCLK_Set() ;OLED_SCLK_Clr();
}
/**********************************************
// IIC Write byte
**********************************************/void Write_IIC_Byte(unsigned char IIC_Byte)
{unsigned char i;unsigned char m,da;da=IIC_Byte;OLED_SCLK_Clr();for(i=0;i<8;i++)		{m=da;//	OLED_SCLK_Clr();m=m&0x80;if(m==0x80){OLED_SDIN_Set();}else OLED_SDIN_Clr();da=da<<1;OLED_SCLK_Set();OLED_SCLK_Clr();}
}
/**********************************************
// IIC Write Command
**********************************************/
void Write_IIC_Command(unsigned char IIC_Command)
{IIC_Start();Write_IIC_Byte(0x78);            //Slave address,SA0=0IIC_Wait_Ack();	Write_IIC_Byte(0x00);			//write commandIIC_Wait_Ack();	Write_IIC_Byte(IIC_Command); IIC_Wait_Ack();	IIC_Stop();
}
/**********************************************
// IIC Write Data
**********************************************/
void Write_IIC_Data(unsigned char IIC_Data)
{IIC_Start();Write_IIC_Byte(0x78);			//D/C#=0; R/W#=0IIC_Wait_Ack();	Write_IIC_Byte(0x40);			//write dataIIC_Wait_Ack();	Write_IIC_Byte(IIC_Data);IIC_Wait_Ack();	IIC_Stop();
}
void OLED_WR_Byte(unsigned dat,unsigned cmd)
{if(cmd){Write_IIC_Data(dat);}else {Write_IIC_Command(dat);	}
}/********************************************
// fill_Picture
********************************************/
void fill_picture(unsigned char fill_Data)
{unsigned char m,n;for(m=0;m<8;m++){OLED_WR_Byte(0xb0+m,0);		//page0-page1OLED_WR_Byte(0x00,0);		//low column start addressOLED_WR_Byte(0x10,0);		//high column start addressfor(n=0;n<128;n++){OLED_WR_Byte(fill_Data,1);}}
}/***********************Delay****************************************/
void Delay_50ms(unsigned int Del_50ms)
{unsigned int m;for(;Del_50ms>0;Del_50ms--)for(m=6245;m>0;m--);
}void Delay_1ms(unsigned int Del_1ms)
{unsigned char j;while(Del_1ms--){	for(j=0;j<123;j++);}
}//坐标设置void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 	OLED_WR_Byte(0xb0+y,OLED_CMD);OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);OLED_WR_Byte((x&0x0f),OLED_CMD); 
}   	  
//开启OLED显示    
void OLED_Display_On(void)
{OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ONOLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
}
//关闭OLED显示     
void OLED_Display_Off(void)
{OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFFOLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
}		   			 
//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!	  
void OLED_Clear(void)  
{  u8 i,n;		    for(i=0;i<8;i++)  {  OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); } //更新显示
}
void OLED_On(void)  
{  u8 i,n;		    for(i=0;i<8;i++)  {  OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   for(n=0;n<128;n++)OLED_WR_Byte(1,OLED_DATA); } //更新显示
}
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示				 
//size:选择字体 16/12 
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size)
{      	unsigned char c=0,i=0;	c=chr-' ';//得到偏移后的值			if(x>Max_Column-1){x=0;y=y+2;}if(Char_Size ==16){OLED_Set_Pos(x,y);	for(i=0;i<8;i++)OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);OLED_Set_Pos(x,y+1);for(i=0;i<8;i++)OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);}else {	OLED_Set_Pos(x,y);for(i=0;i<6;i++)OLED_WR_Byte(F6x8[c][i],OLED_DATA);}
}
//m^n函数
u32 oled_pow(u8 m,u8 n)
{u32 result=1;	 while(n--)result*=m;    return result;
}				  
//显示2个数字
//x,y :起点坐标	 
//len :数字的位数
//size:字体大小
//mode:模式	0,填充模式;1,叠加模式
//num:数值(0~4294967295);	 		  
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2)
{         	u8 t,temp;u8 enshow=0;						   for(t=0;t<len;t++){temp=(num/oled_pow(10,len-t-1))%10;if(enshow==0&&t<(len-1)){if(temp==0){OLED_ShowChar(x+(size2/2)*t,y,' ',size2);continue;}else enshow=1; }OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2); }
} 
//显示一个字符号串
void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 Char_Size)
{unsigned char j=0;while (chr[j]!='\0'){		OLED_ShowChar(x,y,chr[j],Char_Size);x+=8;if(x>120){x=0;y+=2;}j++;}
}
//显示汉字
void OLED_ShowCHinese(u8 x,u8 y,u8 no)
{      			    u8 t,adder=0;OLED_Set_Pos(x,y);	for(t=0;t<16;t++){OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);adder+=1;}	OLED_Set_Pos(x,y+1);	for(t=0;t<16;t++){	OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);adder+=1;}					
}
/***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{ 	unsigned int j=0;unsigned char x,y;if(y1%8==0) y=y1/8;      else y=y1/8+1;for(y=y0;y<y1;y++){OLED_Set_Pos(x0,y);for(x=x0;x<x1;x++){      OLED_WR_Byte(BMP[j++],OLED_DATA);	    	}}
} //初始化SSD1306					    
void OLED_Init(void)
{ 	OLED_WR_Byte(0xAE,OLED_CMD);//--display offOLED_WR_Byte(0x00,OLED_CMD);//---set low column addressOLED_WR_Byte(0x10,OLED_CMD);//---set high column addressOLED_WR_Byte(0x40,OLED_CMD);//--set start line address  OLED_WR_Byte(0xB0,OLED_CMD);//--set page addressOLED_WR_Byte(0x81,OLED_CMD); // contract controlOLED_WR_Byte(0xFF,OLED_CMD);//--128   OLED_WR_Byte(0xA1,OLED_CMD);//set segment remap OLED_WR_Byte(0xA6,OLED_CMD);//--normal / reverseOLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)OLED_WR_Byte(0x3F,OLED_CMD);//--1/32 dutyOLED_WR_Byte(0xC8,OLED_CMD);//Com scan directionOLED_WR_Byte(0xD3,OLED_CMD);//-set display offsetOLED_WR_Byte(0x00,OLED_CMD);//OLED_WR_Byte(0xD5,OLED_CMD);//set osc divisionOLED_WR_Byte(0x80,OLED_CMD);//OLED_WR_Byte(0xD8,OLED_CMD);//set area color mode offOLED_WR_Byte(0x05,OLED_CMD);//OLED_WR_Byte(0xD9,OLED_CMD);//Set Pre-Charge PeriodOLED_WR_Byte(0xF1,OLED_CMD);//OLED_WR_Byte(0xDA,OLED_CMD);//set com pin configuartionOLED_WR_Byte(0x12,OLED_CMD);//OLED_WR_Byte(0xDB,OLED_CMD);//set VcomhOLED_WR_Byte(0x30,OLED_CMD);//OLED_WR_Byte(0x8D,OLED_CMD);//set charge pump enableOLED_WR_Byte(0x14,OLED_CMD);//OLED_WR_Byte(0xAF,OLED_CMD);//--turn on oled panel
}

下面是oledfont.h的全部内容：

#ifndef __OLEDFONT_H
#define __OLEDFONT_H 	   
//常用ASCII表
//偏移量32
//ASCII字符集
//偏移量32
//大小:12*6
/************************************6*8的点阵************************************/
const unsigned char code F6x8[][6] =		
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char code F8X16[]=	  
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 00x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 10x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 20x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 30x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 40xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 50x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 60x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 70x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 80x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 90x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 100x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 110x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 120x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 130x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 140x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 150x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 160x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 170x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 180x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 190x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 200x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 210x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 220x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 230x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 240x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 250x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 260x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 270x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 280x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 290x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 300x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 310xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 320x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 330x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 340xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 350x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 360x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 370x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 380xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 390x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 400x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 410x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 420x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 430x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 440x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 450x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 460xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 470x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 480xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 490x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 500x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 510x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 520x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 530x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 540xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 550x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 560x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 570x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 580x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 590x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 600x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 610x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 620x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 630x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 640x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 650x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 660x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 670x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 680x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 690x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 700x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 710x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 720x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 730x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 740x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 750x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 760x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 770x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 780x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 790x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 800x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 810x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 820x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 830x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 840x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 850x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 860x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 870x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 880x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 890x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 900x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 910x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 920x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 930x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};
//汉字
unsigned char code Hzk[][32]={
//
{0x00,0x00,0xE2,0x24,0x28,0x20,0x20,0x3F,0x20,0x20,0x28,0x24,0xE2,0x00,0x00,0x00},
{0x00,0x00,0xFF,0x00,0x00,0x1F,0x11,0x11,0x11,0x1F,0x40,0x80,0x7F,0x00,0x00,0x00},/*"尚",0*/
/* (16 X 16 , 宋体 )*/
{0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0xFE,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00},
{0x40,0x38,0x01,0x00,0x3C,0x40,0x40,0x42,0x4C,0x40,0x40,0x70,0x05,0x08,0x30,0x00},/*"思",1*/
/* (16 X 16 , 宋体 )*/
{0x20,0xC2,0x0C,0x80,0x08,0x48,0x48,0x48,0x48,0x7F,0x48,0x48,0x48,0x48,0x08,0x00},
{0x04,0x04,0x7E,0x01,0x00,0x00,0xFE,0x42,0x42,0x42,0x42,0x42,0xFE,0x00,0x00,0x00},/*"洁",2*/
/* (16 X 16 , 宋体 )*/
{0x20,0x24,0x24,0xA4,0xFE,0x23,0x22,0x20,0x00,0xF8,0x08,0x08,0x08,0xF8,0x00,0x00},
{0x10,0x08,0x06,0x01,0xFF,0x01,0x06,0x00,0x00,0x3F,0x10,0x10,0x10,0x3F,0x00,0x00},/*"和",3*/
/* (16 X 16 , 宋体 )*/
{0x00,0x00,0xE2,0x24,0x28,0x20,0x20,0x3F,0x20,0x20,0x28,0x24,0xE2,0x00,0x00,0x00},
{0x00,0x00,0xFF,0x00,0x00,0x1F,0x11,0x11,0x11,0x1F,0x40,0x80,0x7F,0x00,0x00,0x00},/*"尚",0*/
/* (16 X 16 , 宋体 )*/
{0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0xFE,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00},
{0x40,0x38,0x01,0x00,0x3C,0x40,0x40,0x42,0x4C,0x40,0x40,0x70,0x05,0x08,0x30,0x00},/*"思",1*/
/* (16 X 16 , 宋体 )*/
{0x10,0x0C,0x24,0x24,0x24,0x24,0x25,0xE6,0x24,0x24,0x24,0x24,0x24,0x14,0x0C,0x00},
{0x02,0x02,0x02,0x02,0x02,0x42,0x82,0x7F,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00},/*"宇",6*/
/* (16 X 16 , 宋体 )*/
};#endif

下面是我的keil5的界面，能体现出各个文件的调用分部情况：

这些内容是我花了好几天的时间才理清楚的，希望看到的小伙伴，给点个爱心，并转发出去，希望帮到更多的人，这个东西网上很难找的。谢谢！

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.xdnf.cn/news/148602.html

如若内容造成侵权/违法违规/事实不符，请联系一条长河网进行投诉反馈，一经查实，立即删除！

相关文章

Eureka

Eureka

大家好我是苏麟今天带来Eureka的使用 . 提供者和消费者 在服务调用关系中&#xff0c;会有两个不同的角色&#xff1a; 服务提供者&#xff1a;一次业务中&#xff0c;被其它微服务调用的服务。&#xff08;提供接口给其它微服务&#xff09; 服务消费者&#xff1a;一次业务…
阅读更多...
微信小程序点单左右联动的效果实现

微信小程序点单左右联动的效果实现

微信小程序点单左右联动的效果实现 原理解析&#xff1a;   点击左边标签会跳到右边相应位置&#xff1a;点击改变rightCur值&#xff0c;转跳相应位置滑动右边&#xff0c;左边标签会跳到相应的位置&#xff1a;监听并且设置每个右边元素的top和bottom&#xff0c;再判断当…
阅读更多...
计算机网络基础（一）:网络系统概述、OSI七层模型、TCP/IP协议及数据传输

计算机网络基础（一）:网络系统概述、OSI七层模型、TCP/IP协议及数据传输

通信&#xff0c;在古代是通过书信与他人互通信息的意思。 今天&#xff0c;“通信”这个词的外沿已经得到了极大扩展&#xff0c;它目前的大意是指双方或多方借助某种媒介实现信息互通的行为。 如果按照当代汉语的方式理解“通信”&#xff0c;那么古代的互遣使节、飞鸽传书…
阅读更多...
竞赛选题 机器视觉的试卷批改系统 - opencv python 视觉识别

竞赛选题 机器视觉的试卷批改系统 - opencv python 视觉识别

文章目录 0 简介1 项目背景2 项目目的3 系统设计3.1 目标对象3.2 系统架构3.3 软件设计方案 4 图像预处理4.1 灰度二值化4.2 形态学处理4.3 算式提取4.4 倾斜校正4.5 字符分割 5 字符识别5.1 支持向量机原理5.2 基于SVM的字符识别5.3 SVM算法实现 6 算法测试7 系统实现8 最后 0…
阅读更多...
Windows安装Docker并创建Ubuntu环境及运行神经网络模型

Windows安装Docker并创建Ubuntu环境及运行神经网络模型

目录 前言在Windows上安装Docker在Docker上创建Ubuntu镜像并运行容器创建Ubuntu镜像配置容器&#xff0c;使其可以在宿主机上显示GUI 创建容器并运行神经网络模型创建容器随便找一个神经网络模型试试 总结 前言 学生党一般用个人电脑玩神经网络&#xff0c;估计很少有自己的服…
阅读更多...
遗留系统陷入困境

遗留系统陷入困境

当我们谈论遗留系统时&#xff0c;我们经常会想到数据中心某处的过时服务器和交换机。我们带着一种病态的迷恋阅读了有关系统性技术问题的文章&#xff0c;这些问题在假期周末困扰着其他旅行者&#xff0c;并为他们缺乏远见而摇头。 然后&#xff0c;我们坐在屏幕前&#xff0…
阅读更多...
c语言实现玫瑰花

c语言实现玫瑰花

浅浅跟波风 1.效果图 2.代码实现 #define _CRT_SECURE_NO_WARNINGS #include <stdio.h> #include <math.h>const int max_iterations 128; const float stop_threshold 0.01f; const float grad_step 0.01f; const float clip_far 10.0f;const float PI 3.1…
阅读更多...
【网络安全】2023年堡垒机品牌大全

【网络安全】2023年堡垒机品牌大全

随着大家网络安全意识的增加&#xff0c;随着国家等保政策的严格执行&#xff0c;越来越多的企业开始采购堡垒机。这里就给大家总结了部分堡垒机品牌&#xff0c;让大家参考参考。 2023年堡垒机品牌大全 1、行云堡垒 2、JumpServer 3、安恒 4、骞云 5、齐治 6、阿里云 …
阅读更多...
【项目开发 | C语言项目 | C语言病人管理系统】

【项目开发 | C语言项目 | C语言病人管理系统】

该项目旨在为医院或其他医疗机构提供一个简易的病人信息管理工具。用户可以通过命令行界面进行病人信息的增、删、查和改操作&#xff0c;并将数据持久化存储在txt文件中。 一&#xff0c;开发环境需求 操作系统 &#xff1a;Windows, Linux 开发环境工具 &#xff1a;Qt, VSC…
阅读更多...
大模型 Decoder 的生成策略

大模型 Decoder 的生成策略

本文将介绍以下内容&#xff1a; IntroductionGreedy Searchbeam searchSamplingTop-K SamplingTop-p (nucleus) sampling总结 一、Introduction 1、简介 近年来&#xff0c;由于在数百万个网页数据上训练的大型基于 Transformer 的语言模型的兴起&#xff0c;开放式语言生…
阅读更多...
安装NodeJS并使用yarn下载前端依赖

安装NodeJS并使用yarn下载前端依赖

文章目录 1、安装NodeJS1.1 下载NodeJS安装包1.2 解压并配置NodeJS1.3 验证是否安装成功2、使用yarn下载前端依赖2.1 安装yarn2.2 使用yarn下载前端依赖参考目标：在Windows下安装新版NodeJS，并使用yarn下载前端依赖，实现运行前端项目。 1、安装NodeJS 1.1 下载NodeJS安装包…
阅读更多...
Git小书系列笔记

Git小书系列笔记

Git准备 首先根据自己的系统安装git&#xff0c;安装成功后可以通过如下指令查看git版本。 使用Git之前&#xff0c;需要配置用户名称和电子邮件。 1.设置全局的用户名和电子邮件 git config --global user.name "Your Name" git config --global user.email &quo…
阅读更多...
代码随想录 Day10 栈与队列 LeetCode T239 滑动窗口的最大值 T347 前K个高频元素

代码随想录 Day10 栈与队列 LeetCode T239 滑动窗口的最大值 T347 前K个高频元素

简要介绍一下单调队列和优先级队列的不同 元素顺序的处理&#xff1a;单调队列中&#xff0c;元素的顺序是单调的&#xff0c;也就是说&#xff0c;队列中的元素按照特定的单调性&#xff08;递增或递减&#xff09;排列。这种特性使得单调队列在处理一些问题时非常高效&#…
阅读更多...
C++ stack和queue

C++ stack和queue

stack的介绍 stack是作为容器适配器被实现的&#xff0c;容器适配器即是对特定类封装作为其底层的容器&#xff0c;并提供一组特定的成员函数来访问其元素&#xff0c;将特定类作为其底层的&#xff0c;元素特定容器的尾部(即栈顶)被压入和弹出 stack的底层容器可以是任何标准…
阅读更多...
【做题笔记】多项式/FFT/NTT

【做题笔记】多项式/FFT/NTT

HDU1402 - A * B Problem Plus 题目链接 大数乘法是多项式的基础应用&#xff0c;其原理是将多项式 f ( x ) a 0 a 1 x a 2 x 2 a 3 x 3 ⋯ a n x n f(x)a_0a_1xa_2x^2a_3x^3\cdotsa_nx^n f(x)a0​a1​xa2​x2a3​x3⋯an​xn中的 x 10 x10 x10&#xff0c;然后让大数的…
阅读更多...
为什么特斯拉和理想，能用很少的SKU获得成功？ -审批版

为什么特斯拉和理想，能用很少的SKU获得成功？ -审批版

作者|普通一涛 编辑|德新 乔布斯喜欢「为改变混乱繁杂而生的现代简约主义」设计理念&#xff0c;所以苹果产品走的都是超级简洁的路线。 在汽车圈&#xff0c;特斯拉和理想也是简洁主义信奉者。 能用两款车打天下&#xff0c;绝不用三款车&#xff0c;能用三款车的&#xff0…
阅读更多...
再学C++ ｜ STL库中可能存在的内存溢出与脏数据问题

再学C++ ｜ STL库中可能存在的内存溢出与脏数据问题

STL库中的 vector 是我们使用最频繁的STD容器之一。它具有广泛的应用&#xff0c;并且在性能方面表现出色。然而&#xff0c;其存在一种潜在问题&#xff0c;即溢出。由于 vector 在使用下标访问元素时不会检查索引是否越界&#xff0c;因此很可能导致溢出错误的出现。这种错误…
阅读更多...
图神经网络 GNN

图神经网络 GNN

之前经常看到图神经网络的内容&#xff0c;但是一直都觉得很难&#xff0c;就没有继续了解&#xff0c;现在抽空学习了一下&#xff0c;简单了解GNN是个什么东西&#xff0c;还没有进行代码实践&#xff0c;随着后续的学习&#xff0c;会继续更新代码的内容&#xff0c;这里先记…
阅读更多...
互联网Java工程师面试题·MyBatis 篇·第二弹

互联网Java工程师面试题·MyBatis 篇·第二弹

目录 16、Xml 映射文件中&#xff0c;除了常见的 select|insert|updae|delete标签之外&#xff0c;还有哪些标签&#xff1f; 17、Mybatis 的 Xml 映射文件中&#xff0c;不同的 Xml 映射文件&#xff0c;id 是否可以重复&#xff1f; 18、为什么说 Mybatis 是半自动 ORM 映射…
阅读更多...
conda安装使用jupyterlab注意事项

conda安装使用jupyterlab注意事项

文章目录 一、conda安装1.1 conda安装1.2 常见命令1.3 常见问题 二、jupyterlab2.1 jupyterlab安装和卸载2.2 常见错误2.2.1 版本冲突&#xff0c;jupyterlab无法启动2.2.2 插件版本冲突 2.3 常用插件2.3.1 debugger2.3.2 jupyterlab_code_formatter 2.4 jupyter技巧 一、conda…
阅读更多...
最新文章

Copyright @ 2022~2023