一、telnet远程管理
[R2]user-interface vty 0 4
[R2-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):123456
[R2-ui-vty0-4]<R1>telnet 192.168.12.2Press CTRL_] to quit telnet modeTrying 192.168.12.2 ...Connected to 192.168.12.2 ...Login authenticationPassword:
<R2>
二、配置AAA认证
[R2]user-interface vty 0 4
[R2-ui-vty0-4]authentication-mode aaa
[R2-ui-vty0-4]q
[R2]aaa
[R2-aaa]local-user user1 password cipher 123456
Info: Add a new user.
[R2-aaa]local-user user1 privilege level 0
[R2-aaa]local-user user1 service-type telnet
[R2-aaa]local-user user2 password cipher 123456
Info: Add a new user.
[R2-aaa]local-user user2 privilege level 3登录user1后，不能进入系统视图
登录user2后，可以进入系统视图
三、保存配置文件
<R1>save r1.cfgAre you sure to save the configuration to r1.cfg? (y/n)[n]:yIt will take several minutes to save configuration file, please wait........Configuration file had been saved successfullyNote: The configuration file will take effect after being activated
<R1>dis startup
MainBoard:Startup system software: nullNext startup system software: nullBackup system software for next startup: nullStartup saved-configuration file: flash:/vrpcfg.zipNext startup saved-configuration file: flash:/vrpcfg.zipStartup license file: nullNext startup license file: nullStartup patch package: nullNext startup patch package: nullStartup voice-files: nullNext startup voice-files: null<R1>startup saved-configuration flash:/r1.cfg
This operation will take several minutes, please wait.....
Info: Succeeded in setting the file for booting system
<R1>dis startup
MainBoard:Startup system software: nullNext startup system software: nullBackup system software for next startup: nullStartup saved-configuration file: flash:/vrpcfg.zipNext startup saved-configuration file: flash:/r1.cfgStartup license file: nullNext startup license file: nullStartup patch package: nullNext startup patch package: nullStartup voice-files: nullNext startup voice-files: null
<R1>
四、FTP配置管理
在R2上开启FTP服务，并添加ftp账号
[R2]ftp server enable
Info: Succeeded in starting the FTP server
[R2]aaa
[R2-aaa]local-user ftp password cipher 123
Info: Add a new user.[R2-aaa]local-user ftp privilege level 3
[R2-aaa]local-user ftp service-type ftp
[R2-aaa]local-user ftp ftp-directory flash:
在R1上通过FTP连接R2
<R1>ftp 192.168.12.2
Trying 192.168.12.2 ...
Press CTRL+K to abort
Connected to 192.168.12.2.
220 FTP service ready.
User(192.168.12.2:(none)):ftp
331 Password required for ftp.
Enter password:
230 User logged in.//下载文件
[R1-ftp]get r2.cfg
200 Port command okay.
150 Opening ASCII mode data connection for r2.cfg.
226 Transfer complete.
FTP: 1419 byte(s) received in 0.110 second(s) 12.90Kbyte(s)/sec.//上传文件
[R1-ftp]put flash:/r1.cfg
200 Port command okay.
150 Opening ASCII mode data connection for r1.cfg.
226 Transfer complete.
FTP: 849 byte(s) sent in 0.220 second(s) 3.85Kbyte(s)/sec.
