驱动开发：STM32F7控制AD5663模拟量输出

AD5663是ADI公司的一款DAC模块，用以实现两路模拟量信号输出。该芯片通过SPI通信来驱动。下面讲解使用STM32F7主控芯片来控制AD5663模拟量输出的流程。

配置STM32F7 SPI通信管脚

STM32CubeMX生成SPI驱动代码

/* SPI3 init function */
void MX_SPI3_Init(void)
{/* USER CODE BEGIN SPI3_Init 0 *//* USER CODE END SPI3_Init 0 *//* USER CODE BEGIN SPI3_Init 1 *//* USER CODE END SPI3_Init 1 */hspi3.Instance = SPI3;hspi3.Init.Mode = SPI_MODE_MASTER;hspi3.Init.Direction = SPI_DIRECTION_2LINES;hspi3.Init.DataSize = SPI_DATASIZE_8BIT;hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;hspi3.Init.CLKPhase = SPI_PHASE_2EDGE;hspi3.Init.NSS = SPI_NSS_SOFT;hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;hspi3.Init.TIMode = SPI_TIMODE_DISABLE;hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;hspi3.Init.CRCPolynomial = 7;hspi3.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;hspi3.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;if (HAL_SPI_Init(&hspi3) != HAL_OK){Error_Handler();}/* USER CODE BEGIN SPI3_Init 2 *//* USER CODE END SPI3_Init 2 */}

AD5663驱动代码开发

头文件io.h

#ifndef __IO_H__
#define __IO_H__#ifdef __cplusplus
extern "C" {
#endif/* Includes ------------------------------------------------------------------*/
#include "gpio.h"/* USER CODE BEGIN Includes *//* USER CODE END Includes *//* USER CODE BEGIN Private defines *//* USER CODE END Private defines */
/* USER CODE BEGIN Prototypes *//*ÃüÁî¶¨Òå*/
#define Write_to_Input_Register         0x000000
#define Update_DAC_Register             0x080000
#define Software_LDAC                   0x100000
#define WriteTo_Update_DAC_Channel      0x180000
#define Power_Down                      0x200000
#define RESET                           0x280000
#define LDAC_Register_Setup             0x300000
#define Reference_Set                   0x380000/*µØÖ·Ä£Ê½,Ñ¡ÔñDACÍ¨µÀ*/
#define DAC_Channel_A                   0x000000
#define DAC_Channel_B                   0x010000
#define DAC_Channel_All                 0X070000//FOR POWER DOWN
#define NORMAL                     0X00
#define K1Ohm                      0X10
#define K100Ohm                    0X20
#define ThreeState                 0X30#define PDACA                      0X01
#define PDACB                      0X02typedef enum
{AOUT1 = 0,AOUT2  = 1,
} AOUT_NAME;extern void IO_Initialize(void);
extern void Set_AOUT_Level(AOUT_NAME aout, uint16_t level);
extern void IO_Function_Test(void);

源文件io.c

#include <string.h>
#include "io.h"
#include "spi.h"
#include "usart.h"/*Global variables*/
uint16_t Aout1, Aout2;static void AD5663_PowerDown(void)
{uint32_t inputShiftData = 0;uint8_t SendSPIByte[3];inputShiftData = Power_Down| NORMAL | PDACA | PDACB;SendSPIByte[0] = inputShiftData>>16;SendSPIByte[1] = inputShiftData>>8;SendSPIByte[2] = inputShiftData;HAL_GPIO_WritePin(DA_SYNC_GPIO_Port, DA_SYNC_Pin, GPIO_PIN_RESET);HAL_SPI_Transmit(&hspi3, SendSPIByte, sizeof(SendSPIByte), 100);HAL_GPIO_WritePin(DA_SYNC_GPIO_Port, DA_SYNC_Pin, GPIO_PIN_SET);
}void IO_Initialize(void)
{AD5663_PowerDown();
}void Set_AOUT_Level(AOUT_NAME aout, uint16_t level)
{uint32_t inputShiftData = 0;uint8_t SendSPIByte[3];if(aout == AOUT1){Aout1 = level;inputShiftData = WriteTo_Update_DAC_Channel | DAC_Channel_A | level;}else if(aout == AOUT2){Aout2 = level;inputShiftData = WriteTo_Update_DAC_Channel | DAC_Channel_B | level;}SendSPIByte[0] = inputShiftData>>16;SendSPIByte[1] = inputShiftData>>8;SendSPIByte[2] = inputShiftData;HAL_GPIO_WritePin(DA_SYNC_GPIO_Port, DA_SYNC_Pin, GPIO_PIN_RESET);HAL_SPI_Transmit(&hspi3, SendSPIByte, sizeof(SendSPIByte), 100);HAL_GPIO_WritePin(DA_SYNC_GPIO_Port, DA_SYNC_Pin, GPIO_PIN_SET);
}void IO_Function_Test(void)
{Set_AOUT_Level(AOUT1, 0x8000);Set_AOUT_Level(AOUT2, 0xEFFF);
}

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.xdnf.cn/news/145452.html

如若内容造成侵权/违法违规/事实不符，请联系一条长河网进行投诉反馈，一经查实，立即删除！